Spraying conveyor, pager, workbench conveyor belt test points

With the accelerated development of industrialization, most factories in China have completed the automation of production equipment. At the same time, some small hand workshops gradually withdrew from the market competition mechanism. Therefore, automation equipment has a decisive influence on the fate of the factory. What kind of belt conveyor equipment should you still hesitate to set up? Are you worried about the low cost performance of a conveyor that uses a lot of money? Shanghai Shengyin Machinery Co., Ltd. specializes in R&D and production of conveyor equipment. It is the first choice of many customers. We can help you solve your troubles about conveyors in a true and honest manner. Today, we will tell you how to test a new machine after the belt conveyor is installed.
After the belt conveyor line is installed, the test machine should be idling, that is, the no-load test machine, and the main components of the belt conveyor can be observed to operate normally. First of all, we can look at the phenomenon of deviation of the conveyor belt operation, the activity during operation, the temperature of the drive unit during operation, and the tightness of the contact between the guide plate and the surface of the conveyor belt.
When you idling the test belt conveyor line, you can adjust the corresponding defects. When the components can be operated normally, the belt conveyor idle test is successfully debugged. However, the success of the belt conveyor idling test is not enough. If you need to understand the performance of the belt conveyor, you need to do a loading operation test. We will explain this issue later.
Spraying conveyor, pager, workbench conveyor belt test points http://